vrijdag 18 december 2015

Panasonic airco storingscode

The outdoor unit maintenance remote controller can be used to check the alarm display. The number of times that LED and blink on the outdoor unit control PCB can be used to check the alarm display. Reageer op deze vraag Misbruik melden. If the fault code suggests the sensor is a problem but you get.


Sensor Resistances - Use to check Thermistor. At 30C a sensor reaading as to the righ then either the Connection or.

When the float switch stays on for 1seconds continuously, the drain pump and indoor unit stop and the timer lamp flashes indicating an Herror. When the float switch turns on for seconds continuously, the thermostat of the indoor unit turns off and the drain pump oper- ates continuously. Panasonic CS-HE9NKE Manual Online: Error Code Table. The serial number on the outdoor unit is CU-140C53XP and the error codes are Fand F41. The display screen on the wired remote control unit and the self-diagnosis LEDs.


Access error codes and troubleshoot instantly offline 2. Choose to view error codes for either residential or package air-conditioner 3. Faulty outdoor unit PCB.

Indoor unit-outdoor unit signal . CS-RE18JKX-CU-RE18JKX-1. Batch alarm by local controller. Unauthorized copying and distribution is a violation of law. Check interconnecting wiring etc. Remote detecting error from indoor unit,.


Class label (see. Figure of Code of Practice) every two metres where the pipework is visible. This includes pipework located in a ceiling space. This lamp blinks when an error occurs or a protective device is activated. Pushing this button selects an operation mode.


Changing the temperature setting. Temperature setting buttons. ASHRAE and the International Mechanical Code of the. ICC as well as CSA provide guidance and define safe- guards related to the use of refrigerants, all of which define a Refrigerant Concentration Level (RCL) of pounds per 0cubic feet for R410A refrigerant.


For additional guidance and precautions related to. Servicewerkzaamheden kunnen op deze manier sneller worden uitgevoerd. The lamp is turned on when an air conditioner is in operation.

Geen opmerkingen:

Een reactie posten

Opmerking: Alleen leden van deze blog kunnen een reactie posten.

Populaire posts